: Great Plains Customization – programming Auto-apply in Accounts Receivable by: Andrew Karasev Microsoft Great Plains is one of three Microsoft Business Solutions mid-market ERP products: Great Plains, Solomon,

@AndrewKarasev

Posted in: #Computers-And-Internet #Update #Temp #Amount #Rm20101 #Aamtapplied #Where #Join #Set #Declare #Select #Coun

Great Plains Customization – programming Auto-apply in Accounts Receivable

by: Andrew Karasev


Microsoft Great Plains is one of three Microsoft Business Solutions mid-market ERP products: Great Plains, Solomon, Navision. Considering that Great Plains is now very good candidate for integration with POS application, such as Microsoft Retail Management System or RMS and Client Relation Systems, such as Microsoft CRM – there is common need in Great Plains customizations and integrations, especially on the level of MS SQL Server transact SQL queries and stored procedures. In this small article we’ll show you how to create auto-apply utility, when you integrate huge number of sales transactions and payments. We will be working with RM20101 – Receivables Open File and RM20201 – Receivables Apply Open File. Let’s see SQL code:

declare @curpmtamt numeric(19,5)
declare @curinvamt numeric(19,5)
declare @curpmtnum varchar(20)
declare @curinvnum varchar(20)
declare @curinvtype int
declare @curpmttype int
declare @maxid int
declare @counter int

-- Create a temporary table
create table #temp
(
[ID] int identity(1,1) primary key,
CUSTNMBR varchar(15),
INVNUM varchar(20),
INVTYPE int,
PMTNUM varchar(20),
PMTTYPE int,
INVAMT numeric(19,5),
PMTAMT numeric(19,5),
AMTAPPLIED numeric(19,5)
)

create index IDX_INVNUM on #temp (INVNUM)
create index IDX_PMTNUM on #temp (PMTNUM)

-- Insert unapplied invoices and payments
insert into #temp
(
CUSTNMBR,
INVNUM,
INVTYPE,
PMTNUM,
PMTTYPE,
INVAMT,
PMTAMT,
AMTAPPLIED
)
select
CUSTNMBR = a.CUSTNMBR,
INVNUM = b.DOCNUMBR,
INVTYPE = b.RMDTYPAL,
PMTNUM = a.DOCNUMBR,
PMTTYPE = a.RMDTYPAL,
INVAMT = b.CURTRXAM,
PMTAMT = a.CURTRXAM,
AMTAPPLIED = 0
from RM20101 a
join RM20101 b on (a.CUSTNMBR = b.CUSTNMBR)
join RM00101 c on (a.CUSTNMBR = c.CUSTNMBR)
where
a.RMDTYPAL in (7, 8, 9) and
b.RMDTYPAL in (1, 3) and
a.CURTRXAM 0 and
b.CURTRXAM 0
order by
a.custnmbr,
b.DOCDATE,
a.DOCDATE,
a.DOCNUMBR,
b.DOCNUMBR

-- Iterate through each record
select @maxid = max([ID])
from #temp

select @counter = 1

while @counter = @curpmtamt ) and (@curpmtamt>0) and (@curinvamt>0)-- if the invoice amount is greater or the same as the payment amount
begin
select @curinvamt = @curinvamt - @curpmtamt -- invoice amount remaining

-- update with the amount that is applied to the current invoice from
-- the current payment
update #temp
set
AMTAPPLIED = @curpmtamt
where
[ID] = @counter

-- update with amount of invoice remaining
update #temp
set
INVAMT = @curinvamt
where
INVNUM = @curinvnum and
INVTYPE = @curinvtype

-- update with amount of payment remaining
update #temp
set
PMTAMT = 0
where
PMTNUM = @curpmtnum and
PMTTYPE = @curpmttype
end
else if (@curinvamt 0) and (@curinvamt>0)-- if the invoice amount is lesser to the payment amount
begin
select @curpmtamt = @curpmtamt - @curinvamt -- payment amount remaining

-- update with the amount that is applied to the current invoice from
-- the current payment
update #temp
set
AMTAPPLIED = @curinvamt
where
[ID] = @counter

-- update with amount of invoice remaining
update #temp
set
INVAMT = 0
where
INVNUM = @curinvnum and
INVTYPE = @curinvtype

-- update with amount of payment remaining
update #temp
set
PMTAMT = @curpmtamt
where
PMTNUM = @curpmtnum and
PMTTYPE = @curpmttype
end

-- go to the next record
select @counter = @counter + 1
end

-- update the RM Open table with the correct amounts
update
RM20101
set
CURTRXAM = b.INVAMT
from
RM20101 a
join #temp b on (a.DOCNUMBR = b.INVNUM and a.RMDTYPAL = b.INVTYPE)

update
RM20101
set
CURTRXAM = b.PMTAMT
from
RM20101 a
join #temp b on (a.DOCNUMBR = b.PMTNUM and a.RMDTYPAL = b.PMTTYPE)

-- create the RM Apply record or update if records already exist
update
RM20201
set
DATE1 = convert(varchar(10), getdate(), 101),
GLPOSTDT = convert(varchar(10), getdate(), 101),
APPTOAMT = APPTOAMT + a.AMTAPPLIED,
ORAPTOAM = ORAPTOAM + a.AMTAPPLIED,
APFRMAPLYAMT = APFRMAPLYAMT + a.AMTAPPLIED,
ActualApplyToAmount = APFRMAPLYAMT + a.AMTAPPLIED
from
#temp a
join RM20101 b on (b.DOCNUMBR = a.INVNUM and b.RMDTYPAL = a.INVTYPE)
join RM20101 c on (c.DOCNUMBR = a.PMTNUM and c.RMDTYPAL = a.PMTTYPE)
join RM20201 d on (d.APFRDCTY = a.PMTTYPE and
d.APFRDCNM = a.PMTNUM and
d.APTODCTY = a.INVTYPE and
d.APTODCNM = a.INVNUM)
where
a.AMTAPPLIED 0

insert into RM20201
(CUSTNMBR,
DATE1,
GLPOSTDT,
POSTED,
APTODCNM,
APTODCTY,
APTODCDT,
ApplyToGLPostDate,
CURNCYID,
CURRNIDX,
APPTOAMT,
ORAPTOAM,
APFRDCNM,
APFRDCTY,
APFRDCDT,
ApplyFromGLPostDate,
FROMCURR,
APFRMAPLYAMT,
ActualApplyToAmount)
select
CUSTNMBR = a.CUSTNMBR,
DATE1 = convert(varchar(10), getdate(), 101),
GLPOSTDT = convert(varchar(10), getdate(), 101),
POSTED = 1,
APTODCNM = a.INVNUM,
APTODCTY = a.INVTYPE,
APTODCDT = b.DOCDATE,
ApplyToGLPostDate = b.GLPOSTDT,
CURNCYID = b.CURNCYID,
CURRNIDX = '',
APPTOAMT = a.AMTAPPLIED,
ORAPTOAM = a.AMTAPPLIED,
APFRDCNM = a.PMTNUM,
APFRDCTY = a.PMTTYPE,
APFRDCDT = c.DOCDATE,
ApplyFromGLPostDate = c.GLPOSTDT,
FROMCURR = c.CURNCYID,
APFRMAPLYAMT = a.AMTAPPLIED,
ActualApplyToAmount = a.AMTAPPLIED
from
#temp a
join RM20101 b on (b.DOCNUMBR = a.INVNUM and b.RMDTYPAL = a.INVTYPE)
join RM20101 c on (c.DOCNUMBR = a.PMTNUM and c.RMDTYPAL = a.PMTTYPE)
where
a.AMTAPPLIED 0 and
not exists (select 1
from RM20201 d
where d.APFRDCTY = a.PMTTYPE and
d.APFRDCNM = a.PMTNUM and
d.APTODCTY = a.INVTYPE and
d.APTODCNM = a.INVNUM)

drop table #temp

Vote Up Vote Down

0 Reactions   React

Replies (0) Report

Login to post a comment!